PIR Motion Sensor Wall Light Switch -1 Gang/Way 10A – Ceiling Movement Automatic [D007] / 541sold

Description

Product Description:

• 10A PIR Switch – 1 Way – 5m Range
• Please note – 3 Terminals on back – Load in, Load out, Neutral (must always be connected). We also sell a PIR product with a switch on the faceplate for keeping a circuit constantly live or dead, please search through our shop.
• This light switch can be used as a replacement or new switch with a 250V rated consumer unit (fuse box) as found in most UK houses. It can be used with a standard single back box and requires a 25mm depth as a minimum. If required more than one of these PIR switches can be linked in parallel to make a circuit live, this could be useful at the top and bottom of a stair case.
• Specification –
• Power rating – 240V – 50/60Hz
• Current Rating – 10A for incandescent lamps, 3A for energy saving lamps, fluorescent lamps and fans.
• Colour – White
• Photocell included – This allows you to adjust in what sort of lighting conditions the PIR switch becomes active (5 to 1000 lux). For example, only at night.
• Time lag on vacant area – 1 to 16 minutes (adjustable)
• Coverage – 120 degress within a 5 metre distance.
• Range – Range can be increased to 8m when room temperature is 20 degrees or lower. In higher temperatures the detection area is reduced
• Standby power consumption – <0.2W
• For optimum use, the distance between the lamp and this switch should be greater than 0.5m
• Dimensions – 85mm (W) x 85mm (H) x 33mm (D)
• Standards – ROHS

Box Content:

• 1 X PIR Motion Sensor Wall Light Switch