300M LCD Electric Dog Collar Training Remote Control Anti-Bark Pet Trainer CA [PT01] / 937sold

Description

Product Description

Rechargeable Waterproof Safety Static ECollar

• Safety,you can effectively train the pet and bring it no harm
• The system can be used for1 or 2 receivers. This listing is for 1 dog use only
• 100 levels of vibration and 100 levels of static (optional)
• It is easily adjustable through the remote transmitter and you can view your selected level via the LCD screen
• You can send a TONE only to the receiver to warn or call without an electronic stimulus
• Up to 300 meter range (in open field)
• The controller & receiver built-in 3.7V/550mAh rechargeable lithium battery, Both remote transmitter and collar receiver are rechargeable and can be charged through mains socket using charger plug supplied
• Power saving
• LED torch light on the remote transmitter and light mode on the collar receiver to help locate your dog in the dark;
• Waterproof receiver for outdoor training
• Short and long prongs for various coat type
• Very lightweight and compact remote transmitter comes with belt clip
• Suitable for healthy dogs of over 6 months old.

Specifications:

• Collar Receiver
• Size: around 6cm (length)*3cm(height)*3.5cm(width) ( around 2.4” *1.2”*1.4”)
• Collar strap adjustable from around 28cm to 50cm (from around 11.2” to 20”);
• Weight: around 70g (including collar strap)
• Rechargeable.
• Weatherproof Sealed.
• With short and long prongs to choose.

(Note: If you would need to attach leash on the dog, please use dedicated collar strap, the D ring on this collar strap is only for attaching the name tag.)

• Remote control Transmitter
• Size: around 8cm (length) *2cm(height)*4cm(width) (around 3.1”*0.8”*1.6”);
• Weight: around 60g.
• Power: Rechargeable battery fitted.

How to Use the Transmitter

1. To turn on/off the Transmitter, hold the Transmitter for 5 seconds.
2. Set to the different modes by pressing the Mode button – the LCD images will change.
3. Press the up and down buttons on right hand side to set level.
4. Choose the different channels for l or 2 receivers.
5. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
6. In STANDBY MODE, press any button (except LED light button) to wake it up.

Prepare the Remote Transmitter

Charge the Remote Transmitter

1. Connect the charger connector to the charging jack.
2. Plug the charger into a standard outlet.
3. The red light on the Transmitter will be lighted.
4. Charge the Transmitter at least 6 hours for the first charger.
5. After fully charged, the red led will be turned off automatically.

Prepare the Collar Receiver

Charge the Collar Receiver

1. Connect the charger connector to the charging jack.
2. Plug the charger into a standard outlet.
3. The red LED light inside the Collar Receiver will be lighted.
4. Charge the Collar Receiver at least 6 hours for the first charge.
5. After fully charged, the red LED light will be turned off automatically.
6. When charging is completed, replace the rubber cover.
Low battery indicator: the Collar Receiver will keep beeping for 2 minutes unless it gets charged.

Connect the Transmitter with the Collar Receiver

1. Turn on the Transmitter and choose 1 or 2 channels to encode.
2. Lift the Reset part of Rubber cover in the Collar Receiver.
3. With a pen or paper clip, press the Reset Button inside the Collar Receiver.
4. After a beep from the Collar Receiver, press the LAUNCH button on Transmitter immediately.
5. The Collar Receiver will beep – it is now encoded to the Transmitter.
6. After Encoding is completed, replace the rubber cover back.
Import Notice: The Collar Receiver is designed to be waterproof. The
Rubber cover has to put in the right position. It may be hard to put it back when you are not used to it. You could take out the screw first and it may help you to put the Rubber cover to the right positions

How to check the static is working

1. Use the test light LED – provided.
2. Attach the light to the metal probes – select Static Mode – you can see static symbol on the screen- press the LAUNCH button – the LED will flash on.
3. Select a low number on the LCD display – put your fingers on the metal probes and press the launch button.

Box Contents

• 1 x Rechargeable remote control
• 1 x Rechargeable Collar
• 1 x Adjustable collar strap
• 1 x Test light and replacement probes
• 1 x UK Charger set
• 1 x Users manual
• This item is sent in original retail package