300M LCD Electric Dog Collar Training Remote Control Anti-Bark Pet 2 Dogs CA [PT02] / 1616sold

Description

Product Description

• Up to 300 meter range (in open area);
• 100 levels of vibration & static – levels can be altered by using of up & down buttons;
• Easy-to-read Clear LCD screen;
• You can remember the levels that suit your dog so that no need to adjust next time;
• Safe, humane & highly effecient for training your pet dog;
• Built-in Rechargeable 3.7V 500mAh lithium battery for the Transmitter ;
• Waterproof Collar Receiver (with rechargeable battery);
• Collar strap adjustable from around 28cm to 50cm(from around 11.2″ to 20″);
• Power saving features for both Transmitter & Collar Receiver to conserve battery life;
• Rechargeable & Waterproof?

How to Use:

Charge the Remote Transmitter

1. Connect the charger connector to the charging jack.
2. Plug the charger into a standard outlet.
3. The red light on the Transmitter will be lighted.
4. Charge the Transmitter at least 6 hours for the first charger.
5. After fully charged, the red led will be turned off automatically.
The Symbol of Low Battery Indicator: Q will show up on the right down side of LCD screen.

Use the Transmitter:

1. To turn on/off the Transmitter, Press the mode button on the Transmitter for 5 seconds.
2. By pressing the Mode button to change to different modes — the LCD images will change.
3. Press the up and down buttons on right hand side to set level.
4. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
5. In STANDBY MODE, press any button (except LED light button) to wake it up.

Charge the Collar Receiver

1. Connect the charger connector to the charging jack.
2. Plug the charger into a standard outlet.
3. The red LED light inside the Collar Receiver will turn on
4. Charge the Collar Receiver at least 6 hours for the first charge.
5. After fully charged, the red LED light will be turned off automatically.
6. When charging is completed, put the rubber cover in the right position to keep the internal unit from dust and water.
Low battery Indicator: the Collar Receiver will keep beeping for 2 minutes unless it gets charged.

Connect the Transmitter with the Collar Receiver

1. Turn on the Transmitter.
2. Lift the Reset part of the Rubber cover in the Collar Receiver.
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.
4. Press the LAUNCH button on the Transmitter immediately while you are hearing a beep from the collar.
5. The Collar Receiver will beep; it means that the Transmitter has encoded the collar.
6. After completion, put the rubber cover in the right position to keep the internal unit from dust and water.

Box Contents

• 1 x Remote Control
• 2 x Collars
• 1 x UK Charger (UK 3pin)
• 1 x USB Charger Cable
• 2 x Adjustable Collar Strap
• 4 x Long Prongs
• 4 x Short Prongs
• 2 x Test Bulb
• 1 x User Manual
• This item is sent in original retail package